| The Corrosion and Wear-Corrosion of the Iron-Base AmorphousCoating Prepared by the HVOF Spraying |
Metals |
2023/06 |
Pin-Hsun Liao, Jing-Wei Jian and Leu-Wen Tsay |
| The effects of Cr and Ni equivalents on the microstructure and corrosion resistance of austenitic stainless steels fabricated by laser powder bed fusion |
Journal of Manufacturing Processes |
2023/03 |
Ting-Sheng Hung, Tai-Cheng Chen, Hung-Yi Chen, Leu-Wen Tsay |
| Formation of Sub-100 nm Femtosecond Laser-Induced Periodic Fine Structures on Laser Powder Bed Fusion Fabricated Stainless Steel |
Laser Micro/Nanoengineering |
2023/02 |
Chung-Wei Cheng, Siou-Jhun Jhu, Yi-Hsien Liu, Shu-Chun Yeh |
| Effect of serrated grain boundary on tensile and creep properties of a precipitation strengthened high entropy alloy |
Science and Technology of Advanced Materials |
2023/01 |
Jhuo-Lun Lee, Pei-Te Wang, Kai-Chi Lo, Pai-Keng Shen, Nien-Ti Tsou, Koji Kakehi, Hideyuki Murakami, Che-Wei Tsai, Stéphane Gorsse, An-Chou Yeh |
| Oxidation Behavior, Insulation Resistance, and Permeability of FeSiCr Alloys for Multilayer Inductors |
Alloys |
2022/12 |
Christoph Priese, Jörg Töpfer |
| Power Molding Inductors Prepared Using Amorphous FeSiCrB Alloy Powder, Carbonyl Iron Powder, and Silicone Resin |
Materials |
2022/05 |
Hsing-I Hsiang, Liang-Chih Wu, Chih-Cheng Chen, Wen-Hsi Lee |
| Simulation of Particle Trajectory Under Laminar Flow for MDDS Application |
Transactions on Applied Superconductivity |
2022/03 |
Jyun-Rong Huang, Chia-Ming Yang, Wei-Hsuan Chang, In-Gann Chen |
| Selective Laser Melting of Stainless Steel 316L with Face-Centered-Cubic-Based Lattice Structures to Produce Rib Implants |
Materials |
2021/10 |
Cho-Pei Jiang, Alvian Toto Wibisono, Tim Pasang |
| An Effective Strengthening Strategy of Nano Carbide Precipitation and Cellular Microstructure Refinement in a Superalloy Fabricated by Selective Laser Melting Process |
Metals |
2021/10 |
Kai-Chun Chang, Meng-Yun Lee, Tzu-Hou Hsu, Yao-Jen Chang, Kai-Chi Lo, Hyoung Seop Kim, Kuo-Kuang Jen, An-Chou Yeh |
| Comparison of Laser Powder Bed Fusion and Cast Inconel 713 Alloy in Terms of Their Microstructure, Mechanical Properties, and Fatigue Life |
Advanced Engineering Materials |
2021/03 |
Jun-Ren Zhao, Fei-Yi Hung, Chien-Sheng Lu, I-Chun Lai |
| An effective and efficient model for temperature and molding appearance analyses for selective laser melting process |
Journal of Mechanical Working Technology |
2021/02 |
Nitesh Anand, Kai-Chun Chang, Pei-Chen Huang, An-Chou Yeh, Che-Wei Tsai, Chang-Chun Lee, Ming-Tsang Lee, Yu-Bin Chen |
| FeSiCr alloy Powder to Carbonyl Iron Powder Mixing Ratio Effects on the Magnetic Properties of the Iron-Based Alloy Powder Cores Prepared Using Screen Printing |
Materials |
2021/02 |
Hsing-I Hsiang, Kai-Hsin Chuang, Wen-Hsi Lee |
| 高純度不鏽鋼 316L 粉末的製備及其 3D 列印 |
Journal of the Mechatronic Industry |
2021/01 |
Chung Yo/陳弘毅、林正衡、賴羿壬、王正欽、葉建宏 |
| Microstructure and tensile property of a precipitation strengthened high entropy alloy processed by selective laser melting and post heat treatment |
Additive Manufacturing |
2020/12 |
Wei-Chih Lin, Yao-Jen Chang, Tzu-Hou Hsu, Stéphane Gorsse, Fei Sun, Tadashi Furuhara, An-Chou Yeh |
| 高品質的球型金屬粉末處理技術：「氣霧化製程」 |
High Speed 3D printing Magazine |
2020/08 |
Chung Yo |
| 有別於以往的金屬粉末製程：「氣霧化製程」 |
CAE Molding Magazine |
2020/06 |
Chung Yo/王正欽 |
| 金屬積層製造用粉末之製備 |
Bulletin of Powders and Powder Metallurgy Association |
2017/08 |
Chung Yo/王正欽、葉建宏 |
